A traversing spindle axis design ensures stable, orderly winding by maintaining the straight line of the wire feeding. The mounting position of the wire guide varies depending on the winding direction of the workpiece.
| PX01/AX | |
|---|---|
| Winding target | Solenoids, sensors, relays, transformers, motors, etc. |
| Number of spindle axes | 1 spindle |
| Spindle pitch | |
| Spindle speed | Maximum 3,000/6,000 rpm (Choice) |
| Winding wire size range | Ø0.1 to 1.0 mm (Please consult us with product specification) |
| Maximum winding diameter | 150mm |
| Maximum winding width | 0–100 mm |
| Wire-cut method | Manual |
| Tensioning device | Magnetic / Pulse Motor / AC Servo Motor Tension Device (Option) |
| Workpiece Supply & Discharge | Manual loading / unloading |
| Safety protection | Various options according to regulations |
| Power supply voltage (AC V) | φ1 AC200 ～ 230V ±10% 50Hz/60Hz |
| Air supply pressure (MPa) | 0.5MPa (0.49 ～ 0.59) |
| Dimensions (mm) | 300(W) 650(D) 430(H) |
| Mass | 55kg |
| Driving Controls & Units | Sheet switch / AX F1 Controller |