Description
The PX series of machines is developed to give very accurate winding precision by moving the spindle relative to the wire guide.
The balanced design structure of the PX series allows for high speed production while maintaining quality and reliability through minimum vibration.
AC servo motors give fast and reliable axial/radial positioning of the spindle.
TNK's G2 controller with PC interface gives a graphical programming environment that will be familiar for any computer user and machine programmer.
Alternatively for simple windings the AX machine controller can be used.
Particularly suitable for winding the coils required for the solar power panel system and elevator coils.
Specification
Model |
PX01 |
PX01G |
PX02 |
Maximum Bobbin Outer Ø |
150mm |
150mm |
450mm |
Maximum Winding Width |
125mm |
125mm |
150mm |
Winding Wire Range |
Up to 1.0mm |
Up to 3.0mm |
Up to 1.8mm |
Spindle Speed |
10,000/5,000/ 2,500rpm (choice) |
500rpm | |
Spindle Positioning |
Programmable every 1° : Lock every 18° | ||
Maximum Traverse Speed |
250mm/s | ||
Traverse Pitch |
0.001 ~ 9.999mm | ||
Power Supply |
230VAC 50/60Hz single phase | ||
Power Requirement |
600W |
1,100W |
600W |
Air Pressure |
0.49 ~ 0.59MPa | ||
Dimensions |
1,100 (W) x 700 (D) x 700 (H) mm |