Introduction
The PW01 is a general purpose coil winding machine suitable for many types of products.
The maximum operating spindle speed is set by the rotary control. The footpedal is used to directly control the spindle rotation speed up the maximum set by the control.
Four preset winding turn counters can be stored. The rotation of the winding spindle will stop when a preset counter number of winding turns has been completed. Wire guidance is by hand making this machine suitable for small production quantities or special windings like guitar pickup coils where a random winding pattern is required.
Specification
Maximum Bobbin Outer Ø |
120mm |
Winding Wire Range |
Depending on user specification |
Spindle Motor |
60W |
Spindle Speed |
2,500rpm (no load) |
Maximum Turns |
30,000 |
Minimum Turns |
0.1 |
Spindle Resolution |
36° |
Spindle Direction |
Clockwise only |
Spindle Brake |
Electromagnetic |
Counter |
4 presets |
Power Supply |
230VAC 50/60Hz single phase |
Power Requirement |
150W |
Dimensions |
270 (W) x 270 (D) x 220 (H) mm |
Weight |
12kg |