Home.
Back.

Description

 

The feedback wire tension unit uses the wire feeding method for high speed winding control. Tension can be set through the front adjuster, sub-tension by the rear adjuster. The switch between tension and sub-tension is controlled by the winding program.

 

The feedback system will monitor the tension and make changes to the feeding speed to maintain the set tension level even during rapid acceleration and to prevent any sudden change in the tension when winding non-round shaped coils.

 

Two models covers a wide range of tension values for maximum efficiency and cost-effectiveness while still giving fine control of tension adjustment.

 

Specification

Model

ETC200BC

ETC500BC

Tension (g)

5~200

30~500

Wire (mm)

0.02 ~ 0.16

0.056 ~ 0.28

Wire speed max. (m/s)

6

6

Dimensions (mm)

260 x 170 x 80

260 x 170 x 80

Weight (kg)

1.5

1.5

Pneumatic

0.5MPa

0.5MPa

Power

24VDC 3A

24VDC 4A

Contact.
Top.